Hi,
I guess he's talking about the QLogic SANsurfer tool. The latest version
should be the 2.0.23 and you can download it from the QLogic website.
But be aware of some restrictions:
We tried to use it for persistent binding in an environment with dual
attached STK9940A drives. But the Windows hosts were not always able to see
all 16 devices (8 drives, with 2 paths each). Sometimes it were 10, or 5,
or 8, or...
QLogic is working on this effect, it could be some kind of timing problem
during the device detection phase. The suggested workaround (first one
path, then the other, then both) didn't work for us. BTW: The AIX TSM
server doesn't have this problem...
Mit freundlichen Grüßen,
Met vriendelijke groeten,
With best regards,
Bien amicalement,
CU/2,
Dirk Billerbeck
Dirk Billerbeck
GE CompuNet Kiel
Enterprise Computing Solutions
Am Jaegersberg 20, 24161 Altenholz (Kiel), Germany
Phone: +49 (0) 431 / 3609 - 117, Fax: +49 (0) 431 / 3609 - 190,
Internet: dirk.billerbeck @ gecits-eu.com
This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.
[EMAIL PROTECTED]@VM.MARIST.EDU on 31.10.2002 18:02:42
Please respond to [EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
To: mailbox.dekelnsm
cc:
Subject: binding WWN and SCSI on NT with QLOGIC QLA2200
--------------------------------------------------------------------------
I would like the specifics on this as well. What is the version of
the utility that allows you to do this Paul? Do you have a url that I could
look at that would provide some additional doc on it?
At 02:23 PM 10/30/2002 -0500, you wrote:
>In the past week we have implemented this functionality on QLA2200s. It
>appears to work fine.
>
>Paul D. Seay, Jr.
>Technical Specialist
>Naptheon Inc.
>757-688-8180
>
>
>-----Original Message-----
>From: Phillip Wise [mailto:pwise@;NCFBINS.COM]
>Sent: Friday, September 20, 2002 8:47 AM
>To: [EMAIL PROTECTED]
>Subject: Re: binding WWN and SCSI on NT with QLOGIC
>
>
>We've been working this same problem with the Qlogic 2300's. We
downloaded
>a new version of the utility that is supposed to let you save the mapping.
>I'll get the version, and post back. After some preliminary testing
(moving
>library to different port on swith, etc...) it appears to be working...
>
>Jason Livie wrote:
> >
> > Greetings,
> >
> > Is there a way to permanently bind a WWN address to a SCIS ID in w2K
> > with a QLOGIC QLA2200. If so, what is the utility available and the
> > driver version necessary for this. We are currently using driver
> > version 8.1.5.60 on a QLA2200 and W2K.
> >
> > There seems to be a problem whenever the SAN "glitches", the drive
> > attribution on NT changes from the original setting, therefore our
> > drivemapping on TSM is no longer valid in our lanfree environment.
> >
> > sincerely,
> >
> > Jason Livie
> > e-Business Process/Storage Team - Service Delivery
> > IBM Global Services - La Gaude
> > Tél.: 04 9211 5943 - email : [EMAIL PROTECTED]
