Hi Mario
I too faced similar problem.Try this and let me know it worked or not.
copy the devcnfg file to devcnfg.orig
change the library definition from scsi to manual in devcnfg file ( def
library <libname> libtype=manual
define a single drive ( if your library has multiple drives) to the library
Load the database volume into the defined drive
Perform the restore db with the command you mentioned
After sccessfull restoration copy devcnfg.orig to devcnfg
Hope this works
Regards
Raghu S Nivas
Consultant - TSM
DCM Data Systems Ltd
New Delhi
India.
e-mail: [EMAIL PROTECTED],[EMAIL PROTECTED]
Mario Behring
<mariobehring@ To: [EMAIL PROTECTED]
YAHOO.COM> cc:
Sent by: Subject: Re: restore database operation
"ADSM: Dist fail
Stor Manager"
<[EMAIL PROTECTED]
IST.EDU>
10/04/2002
12:46 PM
Please respond
to "ADSM: Dist
Stor Manager"
Avi,
Thank you. The file dsmsrv.opt was not at the ...\server directory. I out
it there and now I have another error:
========================================================================
D:\TSM421\server>dsmserv restore db volume=T00039 devclass=359CLASS8
commit=YES
ANR0900I Processing options file d:\tsm421\server1\dsmserv.opt.
ANR7800I DSMSERV generated at 12:09:11 on Aug 29 2001.
Tivoli Storage Manager for Windows NT
Version 4, Release 2, Level 1.0
Licensed Materials - Property of IBM
5698-TSM (C) Copyright IBM Corporation 1999,2001. All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.
ANR8200I TCP/IP driver ready for connection with clients on port 1500.
ANR0200I Recovery log assigned capacity is 500 megabytes.
ANR0201I Database assigned capacity is 2048 megabytes.
ANR8300E I/O error on library LB1.1.0.2 (OP=8401C050, CC=203, KEY=02,
ASC=04,
ASCQ=03,
SENSE=70.00.02.00.00.00.00.58.00.00.00.00.04.03.FF.03.C4.77.01.01.0A.-
06.01.00.00.00.00.00.00.00.B8.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.32.
32.45.20.20.20.20.00.,
Description=Manual intervention required). Refer to
Appendix D in the 'Messages' manual for recommended action.
ANR9999D admdbbk.c(4294): ThreadId<0> Error 272 creating device class
359CLASS8.
========================================================================
Please notice that the library is in manual mode and the "TSM Server1"
service is stopped when I enter the restore db command.
Also, this time I used the wizards to configure the Device Driver and
there was an error message before the end of the wizard. There was no
devcnfg.out file created so I used a copy from it from the old TSM server.
Thanks.
Mario
--- Avi Langberg <[EMAIL PROTECTED]> wrote:
> .. Have a look at your Registry under OPTION, There is a pointer to
> the
> dsmsrv.opt file under your TSM server name, If TSM server doesn't find
> the dsmsrv.opt he will used a default without yours devcnfg.out file.
>
> Regards,
> Avi Langberg
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
