Hmm, I have just one advice on SANergy, dump it fast! If owner shows the right info about the owner of the volume on the AIX box, everything should work ok. I have some experience with an SUN MDC and AIX host, no problems fusing the volume... Without the fuse, all traffic goes via NFS. Be sure to have loaded the SANergy libc for all environments that use sanergy, or you'll still be using plain old NFS....
On donderdag, augustus 15, 2002, at 09:14 , David Gratton wrote: > Hi Everyone, I know this is a TSM support group but I figure some of > you must be > using SANERGY for LanFree to disk purposes....Anyway my MDC is a > WINDOWS2000 > system , exporting the drives with NFS Maestro....My Sanergy host is AIX > 4.3.3...I was able to mount the drives on my AIX box and even write a > file to > the drive....My problem is when I go to fuse the filesystems I simply > get a > message saying > > Enter Command: fuse|/sanergy/volume1 > ++++++++++++++++++++++++++++++ > Processing command - fuse|/sanergy/volume1... > Error not defined > |Error not defined > 1. []. > ============================== > > Enter Command: > > > > Anyone with any Sanergy experience that could help me would be > appreciated....Thanks > > > Dave Gratton > IBM Global Services > --- Met vriendelijke groeten, Remco Post SARA - Stichting Academisch Rekencentrum Amsterdam http://www.sara.nl High Performance Computing Tel. +31 20 592 8008 Fax. +31 20 668 3167 "I really didn't foresee the Internet. But then, neither did the computer industry. Not that that tells us very much of course - the computer industry didn't even foresee that the century was going to end." -- Douglas Adams
