Hi Steve,

this sounds pretty much like a DB corruption, but I would be very hesitant
to run the auditdb command without verification by TSM support. It might be
dangerous and it can take a lot of time if you run it without specification
of a special area. With an 11 GB DB it took about 36 hours, and I do not
want to imagine how long it will take with our current 30 GB DB.

Both problems seem to be related with each other.

Regards,

Jörg




|--------+---------------------------->
|        |           "Copper, Steve"  |
|        |           <scopper@WESTERNP|
|        |           OWER.CO.UK>      |
|        |           Sent by:         |
|        |           "ADSM: Dist Stor |
|        |           Manager"         |
|        |           <[EMAIL PROTECTED]|
|        |           .EDU>            |
|        |           12.08.2002 12:18 |
|        |           Please respond to|
|        |           "ADSM: Dist Stor |
|        |           Manager"         |
|        |                            |
|--------+---------------------------->
  
>------------------------------------------------------------------------------------------------------------------------|
  |                                                                                    
                                    |
  |       To:     [EMAIL PROTECTED]                                                 
                                    |
  |       cc:     (bcc: Jörg Nouvertné/FIRDU/Europe/MCKINSEY)                          
                                    |
  |       Subject:     2 Questions                                                     
                                    |
  
>------------------------------------------------------------------------------------------------------------------------|




Hi All,

I have 2 different problems that maybe someone can help with.

Firstly when doing expiration I receive the following error message

ANR0871E Cannot find file space name for node 86, file space 1073741823.

How can I find out what the node and file space are (in english). I am
thinking along the lines of a corruption somewhere in the database? If so I
will do a "dsmserv auditdb fix=yes" command.

Secondly, I have a tape volume that will not be reclaimed. When I do a q
vol
command on it, it says that the pct utilised is 0.0. When I try and q the
contents of the tape it says that there is nothing on the tape. However I
can not reclaim it, delete it or move data (it says there is no data to
move). When I start reclamation the activity log says that it will be
reclaimed but then nothing ever happens with it.

This tape has been waiting to be reclaimed for longer than the reuse delay
on the storage pool it is associated with, but that doesn't really matter
as
it is not even getting to that stage.


Has anyone come across these problems before? Are they linked?


Thanks in advance

Steve Copper

_________________________________________________________________

This email and any files transmitted with it are confidential and
intended solely for  the use of the individual or  entity to whom
they  are addressed.  If  you have received  this email in  error
please notify [EMAIL PROTECTED]

This  footnote also confirms  that this  message  has been  swept
for all known viruses by the MessageLabs  Virus Scanning Service.
For further  information  please visit http://www.messagelabs.com




+---------------------------------------------------------+
This message may contain confidential and/or privileged
information.  If you are not the addressee or authorized to
receive this for the addressee, you must not use, copy,
disclose or take any action based on this message or any
information herein.  If you have received this message in
error, please advise the sender immediately by reply e-mail
and delete this message.  Thank you for your cooperation.
+---------------------------------------------------------+

Reply via email to