I like the mtlib -l/dev/lmcp0 -A shows adapters and connectivity... If you are HA on your 3494...it will show you both sides, both adapters... FYI
-----Original Message----- From: Seay, Paul [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 01, 2002 3:47 AM To: [EMAIL PROTECTED] Subject: Re: 3494 i?O error on 3590 drives Did you install the ibmatl code for a 3494 library? If so, can you issue this command: mtlib -l 3494lib -qL This will verify that you can talk to the library. Paul D. Seay, Jr. Technical Specialist Naptheon Inc. 757-688-8180 -----Original Message----- From: Koen Willems [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 30, 2002 6:45 PM To: [EMAIL PROTECTED] Subject: 3494 i?O error on 3590 drives Dear Listers, When I want to define a 3590 in 3494 library i get an I/O error. define libr 3494lib type=349X device=3494lib define drive 3494lib drive0 device=mt2.0.0.1 Server option enable3590libr yes. My scsi adresses on the drives are oke. RMS is disabled. Termination is oke. I can see my 3590 on my adaptec 2944 scsi bus. I use tsm device drivers fot 3590. I am runnin W2K TSM 4.2.2. Does anybody ever connected an 3494 to NT or W2k ? Thnx 4 your Time, Koen Willems _________________________________________________________________ Join the world s largest e-mail service with MSN Hotmail. http://www.hotmail.com
