Hi Gilbert
Interesting enough for us that there is somebody out there with the same
setup as we have. Now we had the same problem with a TSM-Server upgrade to
4.2.1.15. We are not yet finished with the solution (maybe next week we
will know it for sure) but it seems that the problem will be solved with an
upgrade of the microcode of the tape drives and the storagetek library.
Today the technician of StorageTek is inhouse to do the upgrade. We don't
know yet the number of the microcode upgrade but if you need it, we can
give it to you tomorrow.
Here some of our failures:
26.06.02 10:43:54 ANR8302E I/O error on drive TSMT320 (/dev/mt1)
(OP=READ,
Error Number=5, CC=305, KEY=04, ASC=44, ASCQ=B6,
SENSE=F0.00.04.00.04.00.00.12.00.00.00.00.44.B6.00.00.00-
.00.37.E8.37.E8.35.4D., Description=Drive
failure).
Refer to Appendix D in the 'Messages' manual for
recommended action.
26.06.02 11:05:04 ANR8302E I/O error on drive TSMT320 (/dev/mt6)
(OP=OFFL,
Error Number=46, CC=203, KEY=04, ASC=53, ASCQ=01,
SENSE=70.00.04.00.00.00.00.12.00.00.00.00.53.01.00.00.00-
.00.5C.88.00.00.00.00., Description=Manual
intervention
required). Refer to Appendix D in the 'Messages'
manual
for recommended action.
27.06.02 02:01:29 ANR8302E I/O error on drive TSMT320 (/dev/mt6)
(OP=OFFL,
Error Number=46, CC=203, KEY=04, ASC=53, ASCQ=01,
SENSE=70.00.04.00.00.00.00.12.00.00.00.00.53.01.00.00.00-
.00.5C.88.00.00.00.00., Description=Manual
intervention
required). Refer to Appendix D in the 'Messages'
manual
for recommended action.
27.06.02 10:04:19 ANR8302E I/O error on drive TSMT320 (/dev/mt5)
(OP=READ,
Error Number=5, CC=305, KEY=04, ASC=44, ASCQ=B6,
SENSE=F0.00.04.00.04.00.00.12.00.00.00.00.44.B6.00.00.00-
.00.37.E8.37.E8.35.4D., Description=Drive
failure).
Refer to Appendix D in the 'Messages' manual for
recommended action.
Best regards,
Beat Largo
Zurich Switzerland
IT SC - Shared Service Center
Storage Management, IFS
Unterrohrstr. 5
Postfach
8952 Schlieren
Phone: +4116258214 / Fax +4116258061
mailto:[EMAIL PROTECTED]
homepage:http://www.zurich.com
Guillaume Gilbert
<guillaume.gilbert@DESJ To: [EMAIL PROTECTED]
ARDINS.COM> cc:
Sent by: "ADSM: Dist Subject: IO errors on tape drives
Stor Manager"
<[EMAIL PROTECTED]>
26.06.2002 21:58
Please respond to
"ADSM: Dist Stor
Manager"
Hi there
Here is our setup. We use Gresham's DistribuTAPE software to manage our STK
9840 drives, which are in an STK 9310 (BIG mainframe library).The drives
are fiber attached
through a Brocade silkworm switch.
We originally used Gresham's AdvanTAPE driver with the generictape device
class. After reading that this class could not do lanfree backups and
library sharing, I decided
to use TSM's native device driver for these drives which are supported
according to tivoli's website. Now changing a device class is not a small
task. You have to migrate
all your tapes to the new class and 600 9840 tapes at 20 gb a piece is a
long and tedeous process. Since then, we've been having all sorts of IO
errors and the more
recent the Server version, the worst it is. My production server is at
4.1.3. When the errors pop up its usually this one :
05/21/2002 09:38:47 ANR8302E I/O error on drive TSMCPLX9840E
(/dev/mt3)
(OP=READ, CC=206, KEY=FF, ASC=FF, ASCQ=FF,
SENSE=**NONE**, Description=General SCSI
failure). Refer
to Appendix D in the 'Messages' manual for
recommended
action.
which is not too bad, just updates the tape to readonly and dismounts it.
We also get CC=205 and some CC=40*. Luckily for me I have a test server
around to test AIX5.1
which is connected to the sam drives so I thought I'd have better luck with
4.2.2.*. Well it's worse, every time a dismount occurs I get this error :
06/26/2002 15:36:39 ANR8302E I/O error on drive TSMCPLX9840E
(/dev/mt0)
(OP=OFFL, Error Number=78, CC=205, KEY=FF,
ASC=FF,
ASCQ=FF, SENSE=**NONE**, Description=SCSI adapter
failure). Refer to Appendix D in the 'Messages'
manual
for recommended action.
And the tape is no longer readable. I've had a PMR open for a month now on
this thing and finally its up to level 2 support.
Does anybody out there have the same setup as I do. Any help would be
appreciated.
Guillaume Gilbert
CGI Canada
