Hi, Sounds like this library is a badged quantum ATL P1000. We have 4 of those here and have had similar problems. This library doesn't allocate a slot for cleaning tapes. The only way round this problem is to checkout all volumes the TSM Server knows about. Remove the volumes that are in the library, including the cleaning tape. Run an audit library, and then place all the volumes removed back in the library. This should fix the problem, (at least it did here). We logged a fault with Tivoli, and all they suggested was to run an audit library. Before you do the above, check your devcnfg.out file and make sure this matches what is in the library.
Cheers Stuart **************************************************************************** The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system. Please note that neither Innogy nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any). *****************************************************************************
