Help!
I'm desperately trying to move a DB2 node from a TSM 4.1.0.0 server on
WinNT4 but seem to be getting nowhere fast.
Client and server are physically on the same hardware.
The export is reading from and writing to 3590 carts in a 3494 library. The
export was running for 40 hours
Process Process Description Status
Number
-------- --------------------
-------------------------------------------------
285 EXPORT NODE ANR0648I Have copied the following: 1 Nodes 1
Filespaces 1 Backup Files 44353846
Kilobytes
(0 errors have been detected). Current input
volume: 030467.Current output volume: 030504.
The input volume appears to hold approximately 68Gb and then node in total
about 450Gb, biggest single backup ~96Gb:
Volume Name: 030467
Storage Pool Name: SMD_TAPE_PRIM
Device Class Name: 3494P3
Estimated Capacity (MB): 68,212.3
Pct Util: 93.3
Volume Status: Full
Access: Read/Write
Pct. Reclaimable Space: 6.7
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 5
Write Pass Number: 1
Approx. Date Last Written: 03-04-2002 08:57:09
Approx. Date Last Read: 16-04-2002 17:58:42
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Last Update by (administrator):
Last Update Date/Time: 16-03-2002 06:04:56
Digging through the actlog that i can see
16-04-2002 18:27:28 ANR8302E I/O error on drive 78F94901 (MT3.0.0.2)
(OP=WRITE, CC=210, KEY=06, ASC=29, ASCQ=00,
SENSE=71.00.-
06.00.00.00.00.58.00.00.00.00.29.00.F5.0A.C0.07.51.00.00-
.05.01.91.00.4E.00.00.00.00.0A.02.00.00.00.00.00.00.00.0-
0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
00.00.00.00.00.00., Description=The device was reset
due
to device power-up, SCSI bus reset, or manual tape
load/eject). Refer to Appendix B in the 'Messages'
manual for recommended action.
Could this have caused the process to hung?
The DB2 Project team asked us to cancel the process but the cancel is still
pending 3hrs after the command was submitted!
Any ideas if the reset may have caused the process to hang and why the
cancel process is taking forever?
Matt
* internal. 7-430-3213
* external. 020-7922-3213
* fax 020-7922-3302
* e-mail [EMAIL PROTECTED]
-----------------------------------------------------------------------------------------------------------------------
This e-mail is intended only for the above addressee. It may contain
privileged information. If you are not the addressee you must not copy,
distribute, disclose or use any of the information in it. If you have
received it in error please delete it and immediately notify the sender.
evolvebank.com is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, 71 Lombard Street, London EC3P 3BS. Registered in
England, number 2065. Telephone No: 020 7626 1500
Lloyds TSB Scotland plc, Henry Duncan House, 120 George Street,
Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone
No: 0131 225 4555
Lloyds TSB Bank plc and Lloyds TSB Scotland plc are regulated by the
Personal Investment Authority and represent only the Scottish Widows
and Lloyds TSB Marketing Group for life assurance, pensions and
investment business.
Members of the UK Banking Ombudsman Scheme and signatories to the UK
Banking Code.
-----------------------------------------------------------------------------------------------------------------------
