You have to grant authority from the server you want to restore from. At the
Netware system prompt key in dsmc loop, then at the tsm prompt set acc b * *
(if backup data this gives access to all this server filespaces to all other
nodes)
set acc a * * (if archive data)
Regards,
James Brents
> -----Original Message-----
> From: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>@PEUSA On
> Behalf Of Bruce Kamp <[EMAIL PROTECTED]>
> Sent: Tuesday, April 16, 2002 4:05 PM
> To: [EMAIL PROTECTED]
> Subject: Re: HELP: RESTORE Netware 4.11 to Netware 5.1 volume
>
> Where & how do I grant restore authority?
>
> ------------------------------------
> Bruce Kamp
> Network Analyst II
> Memorial Healthcare System
> Ph: (954) 987-2020 x4597
> Fax: (954) 985-1404
> E: [EMAIL PROTECTED]
> ------------------------------------
>
>
> -----Original Message-----
> From: Anthony Wong [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 16, 2002 3:14 PM
> To: [EMAIL PROTECTED]
> Subject: Re: HELP: RESTORE Netware 4.11 to Netware 5.1 volume
>
>
> Tsm client node on 4.11 need grant netware 5.1 node restore authority for
> volume Vol1:\home\bkamp\* in order to restore 4.11 file in tsm server to
> different node
>
>
> Using the same TSM node name on 4.11 and 5.1 will not do the trick Problem
> is they have same volume name, but Filespace name store in TSM server has
> the following format
>
> MRH\VOL1:
>
> MR2\VOL1:
>
> may be this is why see session open but nothing get back??
> Tivoli Storage Management Function Verification Test , FVT Automation
> Project Lead Office:408-256-3312 Home:650-757-1661 Cell:415-218-7880
> AIM:smartbluewong Dept Y0LA /Bldg 050-3 / Office 3A64 IBM SSG Division 46
>
>
> Bruce Kamp <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 2002/04/16 11:17:02 AM
>
> Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>
> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>
>
> To: [EMAIL PROTECTED]
> cc:
> Subject: HELP: RESTORE Netware 4.11 to Netware 5.1 volume
>
>
>
> Had a NetWare upgrade from 4.11 to 5.1 go south. Now I need to restore a
> volume to another server!!!!!! TSM 4.1.4.5 on AIX 4.3.3 ML8 Old client ver
> 4.1.3.97 New client ver 4.2.0.0
>
> This is what happens:
> From the command line I'm entering restore MRH1\Vol1:\home\bkamp\*
> MR2\Vol1:\home\bkamp\ -subdir=yes
>
> I see the session on the TSM server but the byte count never changes to or
> from the TSM server. On the client it says <0 - bytes>!!!!!
>
> Any help would be greatly appreciated!!!
>
> ------------------------------------
> Bruce Kamp
> Network Analyst II
> Memorial Healthcare System
> Ph: (954) 987-2020 x4597
> Fax: (954) 985-1404
> E: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
> ------------------------------------
