I believe you need the copygroup defined as "type=archive", not the default "type=backup"... (maybe not the only thing missing..)
> -----Original Message----- > From: Wholey, Joseph (TGA\MLOL) [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, March 13, 2002 9:08 PM > To: [EMAIL PROTECTED] > Subject: virtual volumes? > > > I could really use some help on this one... > > TSMv4.1.3 server on S/390 > TSMv4.1.5 server on AIX-RS/6000 > > I set up server to server communications. All works well. > I set up virtual volumes from the TSM RS/6000 to the TSM S/390 server. > All looked well until I noticed that the utilization on the tape pool I thought I was writing to never > changed. Upon further investigation, I noticed I was writing to a disk pool. Can't > figure out how it's happening. e.g. I direct data (backup db type=full dev=vvol) to the > device class vvol, which of course is devtype server, it's > going to a storage pool that writes to disk. Unfortunately, > this is not how I set this up. I suspect it has something to do with my copygroup > or mgmtclass... here's the output of 4 queries... I know it's > quite a bit to look at, but I'd appreciate if someone could > shed some light on this one. I'm a little confused. > > tsm: ADSM-ML-WSTP>q co virtual-vols virtual-policy f=d > > Policy Domain Name: VIRTUAL-VOLS > Policy Set Name: VIRTUAL-POLICY > Mgmt Class Name: VV-DEFAULT > Copy Group Name: STANDARD > Copy Group Type: Backup <<<<=============<<<<< > Versions Data Exists: 2 > Versions Data Deleted: 1 > Retain Extra Versions: 30 > Retain Only Version: 60 > Copy Mode: Modified > Copy Serialization: Shared Static > Copy Frequency: 0 > Copy Destination: VLDB-POOL > Last Update by (administrator): TGADSJW > Last Update Date/Time: 11/14/2001 11:22:08 > Managing profile: > ************************************************************
