I can tell you right now that the QLOGIC card is going to have problems on the W2K server. Every time you do a fabric update a RSCN is sent out and QLogic will kill the drives in W2K and require a reboot to get them back. The fix for this problem is an unreleased driver 8.1.3 that is supposed to go GA in a couple of weeks.
This is standard stuff. Follow the instructions in the book otherwise. I can probably dig up all the commands that you will need to issue. I can tell you this is really slick stuff based on our experiences. So far, we have only used AIX and Solaris Storage Agents, but we will be doing W2K next week on exactly what you are doing except it is an AIX TSM server. -----Original Message----- From: Bern Ruelas [mailto:[EMAIL PROTECTED]] Sent: Friday, December 14, 2001 9:40 PM To: [EMAIL PROTECTED] Subject: Drive Mapping for W2K over SAN to LTO with Sun TSM server Hello, Has anyone ever mapped a Storage Agent running TDP for Exchange from a Win2k client to an LTO tape device on a Sun Solaris (5.7) TSM server? Here's the setup: Server: SAN: Client: Sun E420 SAN Data Gateway Win2K TSM 4.2.1.7 2108-G07 Storage Agent 4.2.1.7 Emulex LP8000 TDP for Exchange 2.2 Fiber Channel cards ==> McData Switch BA Client 4.2.1 IBM 3584 LTO Ultrium Device Driver 5.0.2.4 IBM 2580 Ultrium Tape Drives QLogic QLA2200 PCI Fiber Adapter 8.0.9.6 Any clues would help. Thanks, -Bern Ruelas Sr. Systems Engineer - Storage Cadence Design Systems 2655 Seely Ave. San Jose, CA 95134 (408) 428-5246
