Jorge, When you define your nodes, the maximum mount points allowed is default to 1. Just do an update on the node and set the maximum mount point allowed to 4 (or less). Do q query node “name” f=d to see the setting.
Hopes this helps Regards ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Gerrit van Zyl Tel: +27 11 800 7400 Fax: +27 11 802 3814 Cell: +27 82 570 4266 Email: [EMAIL PROTECTED] Web: www.faritec.co.za ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Jorge Rodriguez Sent: Thursday, November 08, 2001 10:19 PM To: [EMAIL PROTECTED] Subject: LTO 3584 in a SAN not use several drives in a session Hi all... I have the following, AIX 4.3.3 TSM Server 4.2.0 TSM Storage Agent 4.2.0 TSM Client 4.2.0 TDP for R3 3.2.0.6, LTO 3584 with 4 drives. The SAN fabric is with McData Directors ED-5000 and the LTO is connected to a McData ES-1000, and this conected to the director. I can configure without problems the library and drives in the AIX and TSM, but I can4t use several drives in a backup session. I set Resourceutilization in 8, MaxNumMntPoint in 2 to use two drives, the StorageAgent opens several sessions but only mount a drive. Thanks in Advance Jorge Rodrmguez Caracas - Venezuela _____ Get your FREE download of MSN Explorer at http://explorer.msn.com
