You still can define a SCSI library over 9840 drives and manual library
over DLT drives. You then will be able to perform current backups on new
drives and slowly to migrate data from old cartridges. The drawback is that
you (or the operators) will be the tape robot ;-)

Zlatko Krastev
IT Consultant





ORNESS <[EMAIL PROTECTED]> on 17.10.2001 01:57:49
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To:     [EMAIL PROTECTED]
cc:

Subject:        Re: Mixed drives in STK library

Hi

My STK 9740 Scsi libraries have both DLT7000 and T9840B drives without
ACSLS

9840B drives are FC native
DLT7 drives and LB0 are driven by a SCSI cable...

Rv


----- Original Message -----
From: "Prather, Wanda" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 12, 2001 3:30 PM
Subject: Re: Mixed drives in STK library


> A SCSI library can have only 1 type of drive; an ACSLS library can have 2
> (maybe more, I don't know).
>
> We run TSM for AIX, ACSLS 5.3, STK9710 robots.
> At various times we have run 3490 & DLT drives in the same robot, then
DLT
> and 9840 drives in the same robot.  Certainly makes media conversion
> easier!!
>
> TSM doesn't really "support" it, but what you do is install ACSLS, which
> gives you it's own robot driver on the robot address.  Then you just
define
> two TSM libraries on the same physical robot address.  Then you checkin
one
> type of tape to the first "library", and the other type of tape to the
other
> "library".  It should work unless there is something strange about the
LTO
> support that prevents it.
>
> Check with STK, see if they can find other customers doing it...
>
>
>
>
>
> -----Original Message-----
> From: Bill Mansfield [mailto:[EMAIL PROTECTED]]
> Sent: Friday, October 12, 2001 9:07 AM
> To: [EMAIL PROTECTED]
> Subject: Mixed drives in STK library
>
>
> Can TSM handle mixed drives (LTO and DLT) in an STK L180 library?  It
> appears that a SCSI library can only have one type of drive.  Can this be
> done with ACSLS?  Or some other approach?
> _____________________________
> William Mansfield
> Senior Consultant
> Solution Technology, Inc
>

Reply via email to