Try this:
MOVE MEDIA volume STG=stgpool WHEREST=MOUNTABLEN
That should make the tape a scratch.
Seth Forgosh
-----Original Message-----
From: Robin Sharpe [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 30, 2001 2:48 PM
To: [EMAIL PROTECTED]
Subject: Re: Cannot delete tape in empty status... media state is
incorrect
Tried it... here's the result:
08/30/01 14:42:43 ANR0984I Process 84 for MOVE MEDIA started in the
BACKGROUND at 14:42:43.
08/30/01 14:42:43 ANR0609I MOVE MEDIA started as process 84.
08/30/01 14:42:43 ANR0610I MOVE MEDIA started by ADMIN as process 84.
08/30/01 14:42:43 ANR6682I MOVE MEDIA command ended: 0 volumes
processed.
08/30/01 14:42:43 ANR6691E MOVE MEDIA: No match is found for this move.
08/30/01 14:42:43 ANR0611I MOVE MEDIA started by ADMIN as process 84
has ended.
08/30/01 14:42:43 ANR0985I Process 84 for MOVE MEDIA running in the
BACKGROUND completed with completion state SUCCESS at 14:42:43.
Thanks for the suggestion, though.
BTW, We've gotten into this whole "MOVE MEDIA" situation because we've
outgrown our ATL P3000 library. So, we have a new HP 20/700 on the floor,
in the final stages of testing... upgrading to 4.1 was one of the steps.
Robin Sharpe
Berlex Laboratories
David Longo
<David.Longo@HEALTH-
FIRST.ORG> To: [EMAIL PROTECTED]
cc: (bcc: Robin
Sharpe/WA/USR/SHG)
08/30/01 01:40 PM Subject:
Please respond to Re: Cannot delete tape in
empty status... media state is incorrect
"ADSM: Dist Stor
Manager"
Try this command:
move media * stg=archlog_tape wherestate=mountablenotinlib
wherestatus=empty
Thjis should only take a few seconds. Lokk in actlog to see that it worked
correctly. Tape should bve "Scratch" after this. (NOTE: not sure what
happens if tape is actually in library, we do this for tapes out of
library.)
Double check, may have to manually move tape out and check back in
as scratch.
David Longo
**********************************************************************
This message, including any attachments, contains confidential information intended
for a specific individual and purpose, and is protected by law. If you are not the
intended recipient, please contact sender immediately by reply e-mail and destroy all
copies. You are hereby notified that any disclosure, copying, or distribution of this
message, or the taking of any action based on it, is strictly prohibited.
TIAA-CREF
**********************************************************************
