Have you configured the Eliment adress correctly, because if you dont then
you pobably have the problem there
Kve�ja/Regards
P�tur Ey��rsson
T�knima�ur/Technician
Kerfisfr��ingur IR
IBM SUPPORT
Microsoft Certified System Engineer
N�herji Hf S�mi TEL: +354-569-7700
Borgart�n 37 105 Iceland
URL: http://www.nyherji.is
----- Original Message -----
From: "Monica Merlotti" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 27, 2001 9:59 AM
Subject: ANR9726E - ANR8302E: please help!!
> We are running TSM 4.1.0.0 server on SUN Solaris 8.
> A SUN 8mm Mod. 8500 device has been connected and it works correctly for
> Solaris, we can do mt and tar commands, but when we try to label the
> tape for TSM with either TSM commands
> 1- DSMLABEL
> 2- LABEL LIBVOLUME
> we get the following error msgs and and the tape is ejected.
>
> 1- # ./dsmlabel -drive=/dev/rmt/5mt
> TIVOLI STORAGE MANAGER by Tivoli.
> Volume Label Utility Program for Sun Solaris
> Version 4, Release 1, Level 0.0
> ANR0900I Processing options file dsmserv.opt.
> ANR9722I Insert a new volume in drive '/dev/rmt/5mt', then enter the
> name (1-6 characters) to be used for its label;
> or just press ENTER to quit this program:
> 8mmvol
> ANR9743I Attempting to label volume '8MMVOL' using drive
> '/dev/rmt/5mt'...
> ANR9726E I/O error writing label for volume '8MMVOL' in drive
> '/dev/rmt/5mt'.
>
> 2- label libvolume exabyte 8mmvol -- (exabyte:name of the manual
> library)
> ANR2017I Administrator SERVER_CONSOLE issued command: LABEL libvolume
> exabyte 8mmvol
> ANR0984I Process 3 for LABEL LIBVOLUME started in the BACKGROUND at
> 10:56:36.
> ANR8799I LABEL LIBVOLUME: Operation for library EXABYTE started as
> process 3.
> ANR8326I 001: Mount 8MM volume 8MMVOL R/W in drive DRIVE5 (/dev/rmt/5mt)
> of library EXABYTE within 60 minutes.
> TSM:TSM2>
> ANR8302E I/O error on drive DRIVE5 (/dev/rmt/5mt) (OP=WRITE, CC=207,
> KEY=45, ASC=30, ASCQ=05,
> SENSE=70.00.45.00.00.-
> ANR8302E
> 00.00.15.00.00.00.00.30.05.00.00.00.00.00.01.00.00.00.00.00.00.00.00.00.,
>
> Description=Device is not in a
> ANR8302E state capable of performing request). Refer to Appendix B in
> the 'Messages' manual for recommended action.
>
> Could anyone suggest a solution to fix this situation?
> Many thanks in advance.
> Monica
> ------------------------------------
> Monica Merlotti
> European Commission
> SAI - Joint Research Centre
> Ispra- Italy
> [EMAIL PROTECTED]
