RTFM, see below:
Nwwaitonerror
The nwwaitonerror option specifies that the client program responds in one of the
following ways, if an error occurs while exiting:
Display an error message and wait before returning to the NetWare console.
Return immediately to the NetWare console.
Note: You can exploit the nwwaitonerror option when running DSMC in an automated mode,
such as, from an .NCF file. By default, you are asked to press any key to continue
before you exit the DSMC program. If you specify yes, DSMC will not post this prompt.
Syntax
>>-NWWaitonerror----+ .-Yes--.------+-----------------------------------><
'-No---'
Parameters
Yes
Specifies that the client program displays an error message if it encounters an error.
Press Enter to return to the NetWare console. This is the default.
No
Specifies that the client program returns immediately to the NetWare console if it
encounters an error while exiting. An error message is not displayed.
Examples
Options file:
nww yes
Command line:
Does not apply.
------------------------------
Date: Wed, 20 Jun 2001 11:02:33 +0200
From: Danielsson Lars <[EMAIL PROTECTED]>
Subject: Message: "Thank you for using TSM"
Hi,
Do anyone of you know how to stop the message
"Thank you for using TSM" in the TSM client 4.1.2.16 in Netware?
Thanks
Lars
_________________________________________________
Lars Danielsson
Volvo Information Technology AB
Dept 2510, HD2S
SE-40508 Gothenburg, Sweden
Telephone: +46 31 667479 Telefax: +46 31 662336
E-mail: [EMAIL PROTECTED]
