Hi Marc, Thank you for your reply.
1 - the wrong stanza was edited There was only one stanza using lanfree on the host, the other (b/a backup) always used lan-based backups, I checked that at least 3 times and my colleague looked over my shoulder because I felt like I was going a bit crazy. ;-) 2 - DSM_DIR is set and the wrong dsm.sys file is edited I searched the entire machine, al dsm.sys files are links to the same file that was edited, all have * in front of all lanfree components. 3 - there's another machine also configured to use that nodename This appears to be it because the fqdn I see in the messages resolved to a different server that I know nothing about. Maybe they have something standby that is connecting using the same nodename. The other server also has an IP that's not on the server that I migrated. :-) Thanks for this, I was a bit stuck thinking it had to come from the same machine! Sometimes you just need a little nudge in the right direction, so thanks again. On Tue, Oct 23, 2018 at 1:41 PM Marc Lanteigne <marclantei...@ca.ibm.com> wrote: > Hi Stefan, > > It's likely one of those things: > 1 - the wrong stanza was edited > 2 - DSM_DIR is set and the wrong dsm.sys file is edited > 3 - there's another machine also configured to use that nodename > 4 - there's more than one dsmcad and the wrong one was restarted. You > should be able to see the IP in the activity log when the session is > established, that will at least help you narrow down which machine it's > coming from. > 5 - if enablelanfree is specified more than once in a stanza, the last > reference to it will be the one taking effect. > > - > Thanks, > Marc... > ________________________________________________________ > Marc Lanteigne > Spectrum Protect Specialist AVP / SRT > 416.478.0233 | marclantei...@ca.ibm.com > Office Hours: Monday to Friday, 7:00 to 16:00 Eastern > > Latest Servermon: > http://www-01.ibm.com/support/docview.wss?uid=swg21432937 > Performance Mustgather: > http://www-01.ibm.com/support/docview.wss?uid=swg22013355 > > Follow me on: Twitter, developerWorks, LinkedIn > > > > -----Original Message----- > From: Stefan Folkerts <stefan.folke...@gmail.com> > Sent: Tuesday, October 23, 2018 07:24 AM > To: ADSM-L@VM.MARIST.EDU > Subject: [ADSM-L] I keep getting lan-free backup errors, but we have > migrated away from lanfree backups > > Hi, > > Quick question, I can't seem to solve this little problem. > > I've migrated a couple of nodes from making lanfree backups to making > lan-based backups over 10Gb/s to another server (exported node definitions > only). > Everything works fine except for the fact that actlog is filled with these > warnings for all nodes that made lanfree backups in the past: > > ANE4048W (Session: 755286, Node: <NODENAME>) LAN-Free connection failed. > (SESSION: 755286) > > Now, I removed everythink lanfree related from the stanza of these nodes > and restarted the cad (no scheduler active). > The dsmsta isn't running. > I still get these warnings, I'm a bit at a loss as to why. > I thought enablelanfree yes->no would do the trick but now I have removed > all lanfree entry's and restarted the dsmcad as I said, but still the > messages keep popping up. > > Haven't worked with this in a while, so there is a good chance I'm just > forgetting something. > Any suggestions? > > Regards, > Stefan >
