I have no idea... try to run query vm * -vmrestoretype=instantrestore -detail Efim
> 27 июля 2017 г., в 11:39, rou...@univ.haifa.ac.il <rou...@univ.haifa.ac.il> > написал(а): > > In did ..... despite of the virtual machine was created successfully with > the process Full VM instant restore > > Regards Robert > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Efim > Sent: Thursday, July 27, 2017 11:33 AM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523 > > I correct understood that you try to instant restore VM and can't see the > current restore process status in the Restore -> Instant Access/Restore > Status? > Efim > >> 27 июля 2017 г., в 11:14, rou...@univ.haifa.ac.il <rou...@univ.haifa.ac.il> >> написал(а): >> >> Hello Efim >> >> I run the process on another ESXi and no problem the machine was created >> successfully. >> >> I will check with the VMware administrator the status of the iSCSI on >> this specific EXSi >> >> By the way another question , after the process finished successfully I >> check in the Instant Access/Restore Status windows but got " No data to >> display" >> >> The new machine is power on and working ? >> >> I did the process with full vm Instant Access instead full vm instant >> restore , and when finished successfully I check in Instant Access/Restore >> Status and seethe machine waiting to be dismount. >> >> Best Regards Robert >> >> -----Original Message----- >> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf >> Of Efim >> Sent: Thursday, July 27, 2017 10:32 AM >> To: ADSM-L@VM.MARIST.EDU >> Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523 >> >> Hi, >> did you configure iSCSI on ESXi and set VMISCSIServeraddress on datamover? >> Efim >> >> >>> 27 июля 2017 г., в 9:49, rou...@univ.haifa.ac.il <rou...@univ.haifa.ac.il> >>> написал(а): >>> >>> Hello All >>> >>> Tried the new feature on TSM for VE 8.1.0.1 in the Restore section called >>> "Full VM Instant Restore" . Here what I got running this command. >>> >>> Error Or Warning Messages: >>> • ERROR ANS2421E Cannot detect the iSCSI initiator. >>> • ERROR ANS2411E Instant Restore/Access of virtual machine 'Test1' >>> failed with rc = 6523 • ERROR ANS2421E (RC6523) Cannot detect the iSCSI >>> initiator. >>> >>> I Check on my TSM server , the iSCSI initiator is ON , I can see the >>> iqn id on the Configuration tab in the iSCSI properties >>> >>> I know I miss something but what ?. >>> >>> Any suggestion , tip what to look ? >>> >>> Best Regards Robert
