q libvol tekwolf should give you a list
On Wednesday, March 28, 2001 9:06 AM, Marc Levitan [SMTP:[EMAIL PROTECTED]]
wrote:
> Is there a way to find out what Volume TSM thinks is in a particular Slot
> (Element ID)????????
> I need to find out what volume TSM thinks is in slot 210 so that I can
> check it out of the library... (Slot 210 is empty)
>
> Marc D Levitan
> To: "ADSM: Dist Stor Manager"
> <[EMAIL PROTECTED]>
> 03/28/2001 cc:
> 11:23 AM Subject: Re: audit library STILL
> unsuccessful!(Document link: Marc D Levitan)
>
>
>
>
>
> Unfortunately, i don't know what volume is supposed to go in the slot! =)
> (I can't checkout a volume that i don't know what it is...)
> I also checked ALL of my volumes for their element number hoping that I
> would find one that had slot 210. No luck.
>
>
>
> Roger C Cook
> <rcook@ROTECH To: [EMAIL PROTECTED]
> .COM> cc:
> Sent by: Subject: Re: audit library STILL
> unsuccessful!
> "ADSM: Dist
> Stor Manager"
> <[EMAIL PROTECTED]
> RIST.EDU>
>
>
> 03/28/2001
> 11:14 AM
> Please
> respond to
> "ADSM: Dist
> Stor Manager"
>
>
>
>
>
> If you cannot locate the volume and manually put it into the slot (which I
> had to do for a couple that were in the wrong slot), you will need to use
> FORCE=YES (which I also had to use). Luckily the ones I could not locate
> were scratch volumes.
>
> Roger C Cook
> RCG Information Services
>
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Marc Levitan
> Sent: Wednesday, March 28, 2001 10:48 AM
> To: [EMAIL PROTECTED]
> Subject: audit library STILL unsuccessful!
>
>
> I have made progress though... the original issue is at the bottom.
>
>
> I ran a audit library Tekwolf checklabel=barcode and this is what I got...
>
> 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT
> LIBRARY
> tekwolf checkl=barcode
> 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the
> BACKGROUND at 13:56:42.
> 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF
> started as process 302.
> 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in
> slot-id 47 in library TEKWOLF; loading in drive to
> read
> label.
> 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in
> slot-id 184 in library TEKWOLF; loading in drive to
> read
> label.
> 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in
> slot-id 197 in library TEKWOLF; loading in drive to
> read
> label.
> 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in
> slot-id 204 in library TEKWOLF; loading in drive to
> read
> label.
> 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in
> slot-id 210 in library TEKWOLF; loading in drive to
> read
> label.
> 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=00006C03,
> CC=301, KEY=05, ASC=30, ASCQ=00,
> SENSE=70.00.05.00.00.00-
> .00.0C.00.00.00.00.30.00.00.00.00.00.00.00.,
> Description-
> =Cartridge load failure). Refer to Appendix B in
> the
> 'Messages' manual for recommended action.
> 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF
> failed.
> 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the
> BACKGROUND completed with completion state FAILURE
> at
> 13:56:59.
> SO I looked up which volumes were in the element slot numbers and TRIED to
> check them out and got this:
>
> ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF
> 000224
> CHECKLABEL=YES FORCE=NO REMOVE=YES
> ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at
> 09:07:04.
> ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF
> started as process 307.
> ANR0609I CHECKOUT LIBVOLUME started as process 307.
> ANR8300E I/O error on library TEKWOLF (OP=00006C03, CC=314, KEY=05, ASC=3B,
> ASCQ=0E,
> SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00.,
> Description=The source slot or drive was empty in an attempt to move a
> volume).
> Refer to Appendix B in the 'Messages' manual for recommended action.
>
> So... I decided to check out the volumes WITHOUT checking the Label:
>
> ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF
> 000378
> CHECKLABEL=NO FORCE=NO REMOVE=YES
> ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at
> 09:26:09.
> ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF
> started as process 315.
> ANR0609I CHECKOUT LIBVOLUME started as process 315.
> ANR9999D mmsscsi.c(9067): Could not move volume 000378 from slot 204 to
> slot
> 1010.
> ANR8827E No Entry/Exit port is available on library TEKWOLF.
> ANR8307I 083: Remove ECARTRIDGE volume 000378 from slot with element number
> 204
> of library TEKWOLF; issue 'REPLY' along with the request ID when ready.
> ANR2017I Administrator ADMIN issued command: REPL 83
> ANR8499I Command accepted.
> ANR8438I CHECKOUT LIBVOLUME for volume 000378 in library TEKWOLF completed
> successfully.
> ANR0985I Process 315 for CHECKOUT LIBVOLUME running in the BACKGROUND
> completed
>
> This was SUCCESSFUL!!!
>
> Now I re-ran the Audit Library Tekwolf checklabel=barcode and received an
> error:
> 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in
> slot-id 210 in library TEKWOLF; loading in drive to
> read
> label.
> 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=00006C03,
> CC=301, KEY=05, ASC=30, ASCQ=00,
> SENSE=70.00.05.00.00.00-
> .00.0C.00.00.00.00.30.00.00.00.00.00.00.00.,
> Description-
> =Cartridge load failure). Refer to Appendix B in
> the
> 'Messages' manual for recommended action.
> 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF
> failed
>
> *** HERE IS MY PROBLEM ***
> There is NO Media in ELEMENT SLOT 210! I cannot checkout what is in slot
> 210 because nothing is there! I also cannot audit because it Fails!
>
> Any thoughts?????????????????? Thanks in Advance!
>
> ****************************************************************************
>
> ****************************************************************************
>
> ************************
>
> Hi All-
>
> I am unable to successfully Audit our StorageTek Library. (Audit Library
> libraryname)
>
> The Audit gets to about 3/4 done when I receive an I/O Error:
>
> 03/27/01 10:08:07 ANR8300E I/O error on library TEKWOLF (OP=00006C03,
>
> CC=301, KEY=05, ASC=30, ASCQ=00,
> SENSE=70.00.05.00.00.00-
> .00.0C.00.00.00.00.30.00.00.00.00.00.00.00.,
> Description-
> =Cartridge load failure). Refer to Appendix B in
> the
> 'Messages' manual for recommended action.
> and here is the errpt on the AIX TSM server.
>
> 5680E405 0327100801 P H lb0 STORAGE SUBSYSTEM FAILURE
> 5680E405 0327100801 P H lb0 STORAGE SUBSYSTEM FAILURE
>
> I am at AIX 4.3.3, TSM 3.7.4
> StorageTek 9740 with 4 Drives 9840
>
> It always stops on a different tape. I have exported several tapes and
> retried the audit several times. Always same result.
> I had the StorageTek Service come in and check the library, and it checked
> out ok.
> I find it hard to believe that all of a sudden all of the tapes in the
> library are bad!
>
> Has anyone experienced this?
> Any recommended next steps???
>
> Marc Levitan
> Senior LAN Engineer
> PFPC Global Fund Services
> 508 871-4459
