Hi all,
AIX 4.33 , TSM 3.7.4 .
ACSLS 5.3.0 , on solaris 7.
loaded 90 DLT`S into stk9710
issued command :
#label libvol stk9710 search=yes status=scratch
tsm: TSM>q proc
Process Process Description Status
Number
-------- -------------------- -------------------------------------------------
22 LABEL LIBVOLUME ANR8805I Labelling volumes in library STK9710; 20
volumes(s) labelled.
tsm: TSM>q drive
Library Name Drive Name Device Type Device ON LINE
------------ ------------ ----------- ---------------- -------------------
STK9710 DRIVE0 DLT /dev/mt0 Yes
STK9710 DRIVE1 DLT /dev/mt1 Yes
STK9710 DRIVE2 DLT /dev/mt2 Yes
STK9710 DRIVE3 DLT /dev/mt3 Yes
STK9710 DRIVE4 DLT /dev/mt4 Yes
STK9710 DRIVE5 DLT /dev/mt5 Yes
tsm: TSM>
ACSLS output :
ACSSA> q dri all
2001-02-08 14:52:49 Drive Status
Identifier State Status Volume Type
0, 0, 2, 0 online available DLT7000
0, 0, 2, 1 online available DLT7000
0, 0, 2, 2 online available DLT7000
0, 0, 2, 3 online available DLT7000
0, 0, 2, 4 online in use MED280 DLT7000
0, 0, 2, 5 online available DLT7000
ACSSA>
even though there are 6 drives available TSM is using only one for labeling and
checkin in volumes ..
how i can tell TSM to use all the drives for labeling and checkin process..
Thanks
Shekhar Dhotre
UNIX/Tivoli Admin .
Bayer Corporation (Diagnostic Division)
Medfiled, MA-02052
[EMAIL PROTECTED]
