We have the same problem on our 3.7.4 server. We workaround with the low set
for 1%.
Ken
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> John Monahan
> Sent: Thursday, February 01, 2001 17:54
> To: [EMAIL PROTECTED]
> Subject: Migration doesn't end
>
>
> TSM Server and clients 4.1.0 NT
>
> One of my disk pools is performing the never-ending migration process. I'm
> migrating from disk to one of two drives in a 3494. Migration is started
> by
>
> update stgpool diskpool hi=0 lo=0
>
> after it is started
>
> update stgpool diskpool hi=90
>
> The migration process usually takes around 15 minutes and then the
> "migration process X ended for storage pool DISKPOOL" message comes and my
> migration values are then set back to hi=90 lo=70.
>
> For the last couple of days, I have not gotten the migration process has
> ended message and the process has been lasting for hours even though when
> I query the diskpool, the pct migr value is 0 indicating that all files
> have migrated. The only way I have gotten it to stop is to reset my
> migration values for the diskpool back to hi=90 lo=70, and then finally
> the finished message and the process ends.
>
> I do have caching enabled on both diskpools, one works fine, the other is
> having this problem. It has happened with different drives and tapes, so
> that pretty much eliminates a drive or tape problem. Any other ideas?
>
>
> ===========================================
> John Monahan
> Network Team Coordinator
> Liberty Diversified Industries
> (763) 536-6677
> ===========================================
>
