Group
I have created a script name VOLUME_PCT with the following results:
ANR1461I RUN: Executing command script VOLUME_PCT.
ANR1466I RUN: Command script VOLUME_PCT, Line 5 : select volume_name,
stgpool_name,pct_utilized from volumes
where upper(stgpool_name)='LNTAPECO' and pct_utilized <50 or
upper(stgpool_name)='LNTAPENO' and pct_utilized <50
or upper(stgpool_name)='UNTAPECO' and pct_utilized <50 or
upper(stgpool_name)='UNTAPENO' and pct_utilized <50
or upper(stgpool_name)='NTTAPECO' and pct_utilized <50 or
upper(stgpool_name)='NTTAPENO' and pct_utilized <50.
VOLUME_NAME STGPOOL_NAME PCT_UTILIZED
------------------ ------------------ ------------
A40004 NTTAPECO 8.1
A40012 UNTAPENO 2.0
A40015 NTTAPENO 48.0
A40021 NTTAPENO 32.9
A40081 NTTAPECO 47.4
A40156 NTTAPECO 15.4
ANR1494I RUN: Command return code is 0.
ANR1487I RUN: Command return code is RC_OK (OK).
ANR1462I RUN: Command script VOLUME_PCT completed successfully
My question is how can I generated MOVE DATA commands using the VOLUME_NAMEs in the
results of the above SCRIPT
Thanks
Joe Marchesani .
