TSM's
I know there's a lot of work being done on connecting 3575 ATL's thru an
IBM SAN Data Gateway so there's a good chance someone else (besides me)
has had the following connection problem:
After connecting the 3575L12 to the SAN Data Gateway all scsi devices
(/dev/rmt0 /dev/rmt1 /dev/smc0) become visible to AIX as scsi (fcp)
devices, but when doing a read test on any of the drives it responds
with a device not ready, errno 46. Opening the drive and querying it's
status does not return an error, only when trying to physically do
something to a tape in the drive causes a drive shutdown: device not
ready. The robot (/dev/smc0) is working fine, using tapeutil tapes
can be shuffled around without a problem.
I've made sure that the very latest on software is installed on AIX
(4.3.3 with IY05369, ATAPE 5.1.4.2) and the Gateway (03.41.27). The 3570
drives are at microcode level 5424.
Anybody have a clue ?
______________________________ Reply Separator _________________________________
Subject: Rename NT Server Service
Author: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> at INET-1
Date: 11/30/00 10:57 PM
Hello,
Renaming the NT server services is not recommended.
The server initialization wizard creates up to four instances of the server
and names the services:
TSM Server1
TSM Server2
TSM Server3
TSM Server4
The server utilities depends on these names for certain operations. If
you rename them then the server will work but the wizards and other
features of the server utilities will not work properly with the renamed
service.
If you must rename the services for some reason then it is better to use
remove.exe and install.exe that are located in the ...\tivoli\tsm\utils
directory. You can run each with no arguments to get a usage message. The
majority of the dsmcutil parameters do not apply to the server and you will
have difficulty specifying the service location doing it that way.
Date: Thu, 30 Nov 2000 16:52:47 -0500
From: Steve Firmes <[EMAIL PROTECTED]>
Subject: Rename NT Server Service
Does anyone know how to change the NT Service for the TSM Server? I
used
the 4.1 wizard and the service was created as "Server 1". I would like
to
rename/delete and recreate it with a more appropriate name.
TIA
Stephen Firmes, Storage Management Specialist
Articulent Inc.
45 South Street, Hopkinton, MA 01748
P: 508-497-2500/F: 508-497-3464
Please visit our web site at www.articulent.com
------------------------------
Date: Thu, 30 Nov 2000 16:38:40 -0600
From: Rob Schroeder <[EMAIL PROTECTED]>
Subject: Re: Rename NT Server Service
For NT
go to the location of the backup client (i.e. c:\program
files\tivoli\tsm\baclient)
run the command dsmcutil remove /name:"server 1"
then run dsmcutil install /name......with all the required
parameters, the
parameter list is availble in the online help of the application
Regards,
Mike Collins
Tivoli Storage Manager Development
-----------------------------------------------------------------
ATTENTION:
The information in this electronic mail message is private and
confidential, and only intended for the addressee. Should you
receive this message by mistake, you are hereby notified that
any disclosure, reproduction, distribution or use of this
message is strictly prohibited. Please inform the sender by
reply transmission and delete the message without copying or
opening it.
Messages and attachments are scanned for all viruses known.
If this message contains password-protected attachments, the
files have NOT been scanned for viruses by the ING mail domain.
Always scan attachments before opening them.
-----------------------------------------------------------------
