Hi Friends, Need urgent help. I'm quite new with this. Earlier our engineer has put in some tapes to the 3570 tape library. Now the tapes has been used up and I need to add a few more tapes to the library . There are still more bays to put in. I'm not sure how to do it but this was my steps : 1. Use tapeutil command to put in the new tapes 2. label the vol: label libv magstar1 search=yes labelsource=barcode checkin=scratch 3. audit library magstar1 checklabel=b 4. checkin all the tapes using the web based admin It is define as scratch in the q libvol command for the new tapes introduced But when I issue a backup command (inc), it went through the new tapes but error occurs : ANR 8355E I/O error reading label for vol 02CB26 in drive MAGDRIVE1 (/dev/rmt1) ANR 8311E An I/O error occured while accessing drive MAGDRIVE1 (/dev/rmt1) for GETLOGSENSE operation, errno=22 ANR 8778W Scratch volume 02CB26 changed to private status to prevent re-access regards Ameerul _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com.
