Lee,
see the centens under your question lines.
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Lee Garner
> Sent: Dienstag, 8. August 2000 17:27
> To: [EMAIL PROTECTED]
> Subject: TSM 3.7 --> 4.1, HSM
>
>
> Hi,
>
> My site is in the process of doing a new install
> of TSM on a new RS/6000 SP system.
>
> The version of TSM that IBM ordered & shipped with
> the system is 3.7, not 4.1.
This is a fail by ordering group
> Did TSM V4.1 come out very recently, like in the
> past 30 days? If so, does anyone know if there's
> a free upgrade path from 3.7 to 4.1?
Yes it is.
> Also, we are planning on using the HSM (Space Management)
> client to migrate data in a 700GB filesystem to/from
> an IBM 3494 library (equipped with 3590-E1A drives).
>
> Would love to hear about experiences (good or bad)
> with the HSM client from people who are using it in
> an environment similar to ours (large-scale scientific/
> technical computing).
>
> Our environment:
>
> . IBM RS/6000 SP (40 WinterHawk2 Thin nodes, 2 WinterHawk2 Wide nodes;
> each with 2GB RAM, 4 CPUs, 2 18GB internal disks)
>
> . IBM 3494 Tape Library (with 4 Ultra SCSI Wide 3590-E1A
> drives; current
> cartridge capacity of up to 45TB)
>
> . 1.4TB of SSA Disk (3 7133-D40 SSA drawers, 40 36GB disks; on multiple
> SSA loops)
>
> . AIX 4.3.3
>
> . PSSP 3.1.1
>
> . TSM 3.7 (all components, except HSM: which for some reason is still
> at 3.1)
>
> Thanks,
>
> - Lee
>
> +--------------------------------------------+--------------------
> ------------+
> | Lee Garner (Sr. Systems Programmer) | E-mail:
> [EMAIL PROTECTED] |
> | Academic Computing & Network Services | Fax:
> 850-644-8722 |
> | Florida State University | Voice:
> 850-644-2591 |
> | Tallahassee, Florida 32306-2760 USA | Teleport:
> 30025'34N, 84019'32W|
> +--------------------------------------------+--------------------
> ------------+
>
