If you need to reuse your DLTs then Breece Hill makes a good little library.
I am using 2 Q47s with 3 DLT4000 drives and am deploying 4 more q 47s with
DLT8000 drives. Each holds 60 tapes in a rotating carasel. ADSM supports
it with the SCSI library drivers. They have been very reliable and their
support is good. Even the call is free. Onsite service is expensive but
who isn't and they hardly break anyway. I know the 2 that are currently
deployed have been in place for almost 5 years. I believe Breece Hills can
still be ordered with the older DLT hardware.
Jack
-----Original Message-----
From: Wallace, Gary C
Sent: Friday, July 28, 2000 13:43
To: [EMAIL PROTECTED]
Subject: Re: Recommended ADSM hardware
We migrated from DLT 3000 tape units to IBM 3494 Tape
libraries, they are a
lot more stable than any DLT drives we used.
Gary Wallace
Storage Engineer
Intel Online Services
Technology Integration Management
* Office Phone: 916.356.6465
* Cell Phone: 916.799.4479
* Mail: [EMAIL PROTECTED]
-----Original Message-----
From: Robert Molerio [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 28, 2000 10:33 AM
To: [EMAIL PROTECTED]
Subject: Re: Recommended ADSM hardware
Hi ADSMer's
I need to get off my DLT IV library soon.
Can anybody recommend a IBM or 3rd party vendor that will work with
ADSM 3.2.40 and eventually TSM3.7.1?
I think I will need a library that holds at least 40 DLT IV
tapes as I will
have to reuse the ones I have.
Thanks,
Bob M.
