Sounds interesting, Dave!

I don't know about prior work with 9front on iPhone, but 10 years ago
Inferno was ported to Android:

https://defcon.org/images/defcon-20/dc-20-presentations/Floren/DEFCON-20-Floren-Hellaphone.pdf

/emil

On Mon, Mar 24, 2025 at 6:01 AM Dave MacFarlane via 9fans <9fans@9fans.net>
wrote:

> Hello all,
> 
> I've been working on trying to get a pinephone kernel that can run
> 9front at https://github.com/driusan/9front-A64
> 
> I spent some time this weekend on the userspace getting readings off
> the i2c sensors.
> 
> I've managed to use /dev/i2c*/ to get data from the:
> 1. Touch panel
> 2. Light/proximity sensor
> 3. Magnetometer
> 4. Accelerometer/gyroscope
> 
> and now I want to expose the data in a filesystem before I put it
> online in some other repo.  I've done some looking around but can't
> find any prior art for any of the above sensor types in Plan9.  Does
> anyone know of any?  I'd like to aim for compatibility if they exist.
> 
> Assuming they don't, I'm looking for input if anyone has any strong
> opinions on what the interface should look like.
> 
> Left to my own devices my plan is:
> 
> 1. TouchPanel -- just write to /dev/mousein and treat touches as
>    button 1.  Since it's a userspace driver we can experiment with
>    multitouch later.
> 2. Light/proximity sensor - create a /dev/lightsensor that
>    returns light readings.  A /dev/proximity read returns "close" or
>    "notclose".  No ctl files or scaling.
> 3. Magnetometer - /dev/compass blocks until there's enough
>    data to calibrate.  Reads return 3 values, x y z that are the raw
>    (short int) readings.  /dev/compassctl for calibrating
>    sensitivity/etc.
> 4. Accel/gyroscope - /dev/accel returns 6 readings of the
>    raw (also short) value ax ay az gx gy gz.  /dev/accelctl
>    for customizing sensitivity/etc.
> 
> x/y/z aren't the raw sensor orientation, but normalized so that +y is the
> top of the screen, +x is to the right, and +z is towards the back of the
> phone.
> 
> I've done the work to read the values but haven't done any work to
> expose it other than printing debugging to stdout, so I'm open to
> suggestions to other interfaces.
> 
> - Dave

------------------------------------------
9fans: 9fans
Permalink: 
https://9fans.topicbox.com/groups/9fans/T4d13b3016d2a2310-Mb02cfe38dfcd31c4c1090385
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription

Reply via email to