This is a very late reply. But I figured out the problem. It was due to my VirtualBox configuration. My network was attached to Host-only adapter but in order to access network in plan9 from VirtualBox network should be attached to Bridged Adapter.
Thank you. _resun From: adr<mailto:a...@sdf.org> Sent: Wednesday, January 26, 2022 00:51 To: 9fans<mailto:9fans@9fans.net> Subject: RE: [9fans] Unable to load page in Abaco On Tue, 25 Jan 2022, Saif Resun wrote: > DNSSERVER=8.8.8.8 > > also produced the same error. Hi Saif, as cinap said this var is used by ndb/dns. Look I didn't want to participate in this thread beacuse I don't have a Bell's Plan9|legacy installation right now, but you are going to found the same problems I hit then, the most important is the lack of ciphers. I imported them from 9front while I was using 9legacy. also you need to fix webfs: extend the URL length and add SNI. You can grab it from http://adr.freeshell.org/plan9/patches/ and adapted at your taste, but note that I'm not mantaining it. Now you want to ask yourself, is it worth it? Why don't use 9front instead? Good luck, adr. ------------------------------------------ 9fans: 9fans Permalink: https://9fans.topicbox.com/groups/9fans/T6dd0643df0c7307f-M9c3e8e0a131bc580ccea6ebc Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
