Thank you! I will add them. I'll clarify that TFTP_IP setting will work for RPI4's. I believe RPI3's will still require the dhcpd patch, if I'm not mistaken.
On Thu, Jun 4, 2020 at 4:03 AM Richard Miller <9f...@hamnavoe.com> wrote: > Thanks, Skip. I just net-booted a pi4 using your instructions. Very timely, > as I was running out of 2GB SD cards for my growing pi collection. > > Can I just add two footnotes concerning the pi4 procedure: > - At the first step where it says "copy the EEPROM image of interest from > /lib/firmware/raspberrypi/bootloader/ to pieeprom.bin", I found 26 > different pieeprom.bin files under that directory. I guessed that > "stable" would be the right one, and that seems to have been OK. I > think "vcgencmd bootloader_version" will give you a hint as to which > file is currently in the eeprom. > - If you use the eeprom config var TFTP_IP to hardcode the tftp server > address, you don't need the patched version of Plan 9 dhcpd; in fact > any old dhcp server can then be used without special configuration, > as it only needs to supply an ip address. > ------------------------------------------ 9fans: 9fans Permalink: https://9fans.topicbox.com/groups/9fans/Teeceb2ca38619b36-M43bc20e4e7e329903d13bed5 Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
