> i'll be happy to take a look.

Here's a serial console output while booting.

        nix
        pat: 0107040600070406
        pmstart 0x0000000000600000 pmend 0x0000000120000000
        mmuinit: vmstart 0xfffffffff0000000 vmunused 0xfffffffff0400000 
vmunmapped 0xfffffffff0600000 vmend 0xfffffffffe000000
        pa 0x0000000000600000 (0xfffffffffe000000 0xfffffffff0600000)
        adr: mem 0x0000000000000000 0x000000000009fc00 size 654336
        adr: mem 0x000000000e000000 0x00000000ddd80000 size 3487039488
        adr: mem 0x0000000100000000 0x0000000120000000 size 536870912
        adr: 12/543 21/1918 
        base 0xfffffffff0408000 ptr 0xfffffffff0408000 nunits 14415872; 219 mb
        acpiinit
        aml: readmem: va 0xfffffe00ddd8e064 len 1 d
        aml: readmem: va 0xfffffe00ddd8e064 len 1 d
        aml: readmem: va 0xfffffe00ddd8e064 len 1 d
        acpi parse: APIC FACP HPET 
        acpi load: XSDT FACP DSDT APIC MCFG OEMB HPET GSCI SSDT 
        physalloc color=0 base=0x0000000000000000 size=0x120000000
        lapic0: hz 199999970 max 199999 min 1999 div 11
        #A0: hda: mem fffffe00feaf8000 irq 3
        #A0: hda: codec #0, vendor 10ec0887, rev 00100302
        usb/disk... usb/kb... root is from (il, local)[local!#S/sdu0/fs -B 
10000]: 
        connect...kfs...bad nvram key
        bad authentication id
        bad authentication domain
        
        version...time...
        
        init: starting /bin/rc
        ipconfig: /net/ipifc/clone: bind ether /net/ether0: '/net/ether0' cs: 
file does not exist
        Chan: afmt 0011
        mouseport is (ps2, ps2intellimouse, usb, 0, 1, 2)[usb]: 
        
I can't get the boot operation to go any further than the IL prompt if
I plug in a USB drive, either, so for all intents an purposes the
motherboard is incompatible with 9 Atom.  Its ethernet adapter is also
unrecognised.

I can arrange for the pci -v output, though:

        0.0.0:  brg  06.00.00 8086/2e30   0
                Intel Corporation       4 Series Chipset DRAM Controller 
        0.2.0:  vid  03.00.00 8086/2e32   5 0:fe400004 4194304 2:e000000c 
268435456 4:0000dc01 16
                Intel Corporation       4 Series Chipset Integrated Graphics 
Controller 
        0.27.0: aud  04.03.00 8086/27d8   3 0:feaf8004 16384
                Intel Corporation       NM10/ICH7 Family High Definition Audio 
Controller 
        0.28.0: brg  06.04.00 8086/27d0   5
                Intel Corporation       NM10/ICH7 Family PCI Express Port 1 
        0.28.1: brg  06.04.00 8086/27d2  10
                Intel Corporation       NM10/ICH7 Family PCI Express Port 2 
        0.29.0: usb  0c.03.00 8086/27c8   7 4:0000d401 32
                Intel Corporation       NM10/ICH7 Family USB UHCI Controller #1 
        0.29.1: usb  0c.03.00 8086/27c9  10 4:0000d481 32
                Intel Corporation       NM10/ICH7 Family USB UHCI Controller #2 
        0.29.2: usb  0c.03.00 8086/27ca   6 4:0000d801 32
                Intel Corporation       NM10/ICH7 Family USB UHCI Controller #3 
        0.29.3: usb  0c.03.00 8086/27cb   5 4:0000d881 32
                Intel Corporation       NM10/ICH7 Family USB UHCI Controller #4 
        0.29.7: usb  0c.03.20 8086/27cc   7 0:feaf7c00 1024
                Intel Corporation       NM10/ICH7 Family USB2 EHCI Controller 
        0.30.0: brg  06.04.01 8086/244e 255
                Intel Corporation       82801 PCI Bridge 
        0.31.0: brg  06.01.00 8086/27b8   0
                Intel Corporation       82801GB/GR (ICH7 Family) LPC Interface 
Bridge 
        0.31.2: disk 01.01.8a 8086/27c0   0 0:00000001 16 1:00000001 16 
2:00000001 16 3:00000001 16 4:0000ffa1 16
                Intel Corporation       NM10/ICH7 Family SATA Controller [IDE 
mode] 
        1.0.0:  net  02.00.00 1969/1083  10 0:febc0004 262144 2:0000ec01 128
                Qualcomm Atheros        AR8151 v2.0 Gigabit Ethernet 

In passing, this warning is also worrying:

        rtc clock changes underfoot 1417801644 1417801643


Lastly, any chance you can add SCSI (buslogic or LSI Logic) to a boot kernel?

Lucio.


-------------------------------------------------------------------------------------
This email has been scanned by the MxScan Email Security System.
-------------------------------------------------------------------------------------


Reply via email to