OK, will try that. Thanks!
2014-05-26 20:13 GMT-04:00 Nick Owens <misch...@9.offblast.org>: > yan, > > did you try to use packet capture software like wireshark, or snoopy(8) > on plan 9, to see the packets? > > running wireshark on linux, and snoopy on plan 9, will give you insight > into if the packets reach the other side successfully. > > On Mon, May 26, 2014 at 08:06:21PM -0400, yan cui wrote: > > Hi all, > > > > I used a program to dial from one system to another system, but > > it gives a connection time out error. I have searched on Internet for a > > long time and cannot get a solution. Could you please provide some > > suggestions or hints? Basically, one system is Linux based system with rc > > shell installed (we call it A). The other one is a auth+cpu+file server > > (we call it B). On B, I have used fossil/conf command to listen > tcp!*!564. > > On A, I executed dial tcp!<B's ip address>!564, but it reports a time out > > error after waiting some time. Results are the same when A is a plan9 > > terminal. By the way, I can ping A to B successfully. What could be the > > possible problems? > > > > > > Thanks, Yan > > > > -- > > Think big; Dream impossible; Make it happen. > -- Think big; Dream impossible; Make it happen.
