Hello list,
I'm currently trying to boot a Lenovo ThinkPad T410 from a usb pen drive,
using the image from 9legacy.org, but the boot sequence stops at
sdE0: LLBA 625,142,448 sectors: WDC WD3200BEVT-08A23T1 02.01A02
WD-WXDD-WXD1A1154275 [mediachange]
with every option I try.
When booting 9pcf I come sometimes as far as
init: starting /bin/rc
but after then the first message appears and everything seems stuck.
With 9pccpuf I get
usb/hub... usb/disk... bad authentication password
bad authentication id
bad authentication domain
[... I input some values ...]
mpintrenable: multible botch irq 11, tbdf 5000000, lo 00000049, n
00000049
mpintrenable: out of choices eisa -1 isa 14 tbdf 0xc00fa00 irq 11
intrenable: couldn't enable irq 11, tbdf 0xC00FA00 for sdE (iahci)
awaitspinup: sdE0 didn't spin up after 20 seconds
sdE1: LBA 0 sectors: Optiarc DVD RW AD-7930H 1.D1 [mediachange]
time...
fossil(/def/sdXX/fossil)...version...sdE0: LLBA 625,142,448 sectors: WDC
WD3200BEVT-08A23T1 02.01A02 WD-WXDD-WXD1A1154275 [mediachange]
and then the same thing happens.
Using another USB port on the laptop, I experienced a similar error like in
this thread:
http://9fans.net/archive/2012/07/123
but unlike arisawa I don't get a rc shell at the end.
On this other port, the 9pcf kernel fails with
boot: can't connect to file server: '/boot/kfs' does not exist
panic: boot process died: unknown
[...]
I did then try to add
readparts=
to the plan9.ini, but the result only is
can't update /dev/sdXX/data's devsd partition table for plan9: partition
already in use: "part plan9 32 2097152"
can't update /dev/sdXX/data's devsd partition table for 9fat: partition
already in use: "part 9fat 32 204832"
can't update /dev/sdXX/data's devsd partition table for nvram: partition
already in use: "part nvram 204832 204833"
can't update /dev/sdXX/data's devsd partition table for fscfg: partition
already in use: "part fscfg 204833 204849"
can't update /dev/sdXX/data's devsd partition table for fossil:
partition already in use: "part fossil 204849 2097120"
sdE0: LLBA 625,142,448 sectors: WDC WD3200BEVT-08A23T1 02.01A02
WD-WXDD-WXD1A1154275 [mediachange]
The paecpu kernel suggested by erik fails nearly instantly with
panic: e820 scan failed
I also get following messages spilled all through the kernel output:
mpintrenable: multible botch irq 11, tbdf 5000000, lo 00000049, n
00000049
mpintrenable: out of choices eisa -1 isa 14 tbdf 0xc00c000 irq 11
intrenable: couldn't enable irq 11, tbdf 0xC00D000 for usbehci
mpintrenable: multible botch irq 11, tbdf 5000000, lo 00000049, n
00000049
mpintrenable: out of choices eisa -1 isa 14 tbdf 0xc00e800 irq 11
intrenable: couldn't enable irq 11, tbdf 0xC00E800 for usbehci
mpintrenable: multible botch irq 11, tbdf 5000000, lo 00000049, n
00000049
mpintrenable: out of choices eisa -1 isa 14 tbdf 0xc00fa00 irq 11
intrenable: couldn't enable irq 11, tbdf 0xC00FA00 for sdE (iahci)
Is there anything more I can try?
Thanks,
flo
