Hi Everybody,

I installed Plan 9 on a new computer (Erik's 9atoms.iso), it doesnt
recognize the ethernet device (there is no /net/ether0). I wonder if
something can be done. If changing configuration doesnt help, I hope
its similar enough to an already supported device, so a few changes
here and there can make it work.

By the way, I was also wondering, when will Erik's SATA support arrive
in the main distribution?

Anyway, here are the details of the unrecognized device, from Linux:

- lshw says:
     *-bridge
          description: Ethernet interface
          product: MCP61 Ethernet
          vendor: nVidia Corporation
          physical id: 7
          bus info: p...@0000:00:07.0
          logical name: eth0
          version: a2
          serial: 00:1d:92:0b:b5:23
          size: 100000000
          capacity: 100000000
          width: 32 bits
          clock: 66MHz
          capabilities: bridge pm msi ht bus_master cap_list ethernet
physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
          configuration: autonegotiation=on broadcast=yes
driver=forcedeth driverversion=0.64 duplex=full latency=0 link=yes
maxlatency=20 mingnt=1 multicast=yes port=MII speed=100MB/s
          resources: irq:27 memory:dfff9000-dfff9fff ioport:e480(size=8)

- lspci says:
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
        Subsystem: Micro-Star International Co., Ltd. Device 7309
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (250ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 27
        Region 0: Memory at dfff9000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at e480 [size=8]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 
Enable+
                Address: 00000000fee0100c  Data: 4181
                Masking: 000000fe  Pending: 00000000
        Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: forcedeth
        Kernel modules: forcedeth

Greetings: Béla

Reply via email to