It seems your device is not accepting its address.
Any back-compat option in the bios you can switch on/off ?

was it a warm reboot, or a cold one?

Drop me a line off-list with the info and I'll try to help.

On Wed, Dec 9, 2009 at 6:29 AM, Abhishek Kulkarni <abbyzc...@gmail.com> wrote:
> I've got a relatively newer machine (dell optiplex gx620) which
> i'm trying to install p9 on. sadly, there are no ps/2 ports. i could
> get it to install fine, but the booting stops at the "boot from"
> prompt. and that is when the usb keyboard stops responding.
>
> i tried to boot with usbdebug=2 and this is what i see:
>
> /boot/usbd: /dev/usb/epl1.0 port 1: sts - 0x0 -> r 0x10
> /boot/usbd: /dev/usb/epl1.0: port 2 attach sts 0x201
> /boot/usbd: /dev/usb/epl1.0: port 2: attached status 0x203
> /boot/usbd: opendev 0x58a90 /dev/usb/ep5.0
> /boot/usbd: /dev/usb/ep1.0: port 2: setaddress: request timed out
> /boot/usbd: closedev 0x58a90 /dev/usb/ep5.0
> /boot/usbd: fsadd usbdctl
>
> is there any way i can get it to go?
> thanks.
>
>

Reply via email to